H3C Technologies H3C SR6600-X - Manual (Page 103)

93
Appendix D Arranging slots and numbering
interfaces
Slot arrangement
The router provides many types of interfaces, such as console, AUX, GigabitEthernet, serial (synchronous),
POS, and E1 ports. This chapter describes how these interfaces are numbered.
Figure 85 Slot arrangement on the SR6602-X1
Figure 86 Slot arrangement on the SR6602-X2
NOTE:
In Figure 85 through Figure 86 , the blue numbers represent slot numbers of the SR6602-X routers.
Available slots for FIP-10/FIP-20
Card SR6602-X1 SR6602-X2
FIP-10 Slot1 Slot1
FIP-20 Slot1 Slot1
Numbering interfaces
Before installing a HIM/MIM, you must install a FIP. A FIP-20 supports both HIMs and MIMs, while a
FIP-10 supports only MIMs.
The interfaces of the router are numbered in the form of interface-type X/Y/Z,