H3C Technologies H3C SR6600-X - Manual (Page 60)

50
Hardware management and maintenance
NOTE:
The output depends on your router model. For more information about the commands used in this chapter,
see the corresponding command references.
Displaying hardware information of the router
Displaying the software and hardware version information of
the router
Use the display version command to display software and hardware version information of the router.
The output includes the following information: the current software version and hardware version, router
operating time, type and operating time of each interface module.
<Sysname> display version
H3C Comware Platform Software
Comware Software, Version 5.20, A2605
Copyright (c) 2004-2011 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
H3C SR6602-X uptime is 0 week, 0 day, 0 hour, 1 minute
Slot 0: SR6602-X2 uptime is 0 week, 0 day, 0 hour, 1 minute
CPU type: FREESCALE P4080 1500MHz
4096M bytes DDR3 SDRAM Memory
8M bytes Flash Memory
128K bytes NVRAM
PCB Version: Ver.A
Basic Logic Version: 1.0
Extend Logic Version: 1.0
Basic BootWare Version: 1.00
Extend BootWare Version: 1.00
[FIXED PORT] CON (Hardware)Ver.A, (Driver)1.0, (Cpld)145.0
[FIXED PORT] AUX (Hardware)Ver.A, (Driver)1.0, (Cpld)145.0
[FIXED PORT] MGE 0/0/0 (Hardware)Ver.A, (Driver)1.0, (Cpld)145.0
[FIXED PORT] GE 0/0/0 (Hardware)Ver.A, (Driver)1.0, (Cpld)145.0
[FIXED PORT] GE 0/0/1 (Hardware)Ver.A, (Driver)1.0, (Cpld)145.0
[FIXED PORT] GE 0/0/2 (Hardware)Ver.A, (Driver)1.0, (Cpld)145.0
[FIXED PORT] GE 0/0/3 (Hardware)Ver.A, (Driver)1.0, (Cpld)145.0
[FIXED PORT] XGE 0/0/0 (Hardware)Ver.A, (Driver)1.0, (Cpld)145.0
[FIXED PORT] XGE 0/0/1 (Hardware)Ver.A, (Driver)1.0, (Cpld)145.0