H3C Technologies H3C SR6600-X - Manual (Page 62)

52
Table 11 Output description
Field Description
Slot 0 Interface module model
SubSlot No. Slot number of the interface module
Card Type Module model. The value NONE indicates that no module is present in the slot.
Status
Running status of the module:
• Absent—No module is present in the slot.
• Fault—The module in the slot is booting, or the module fails and cannot boot
properly.
• Normal—The module in the slot is a service module and is operating properly.
Max Ports Maximum number of interfaces that the module supports.
Displaying the electrical label information of a module
Use the display device manuinfo command to display the electrical label information of the module in
each slot.
Electrical label information is also called permanent configuration data or archive information, which
includes the module name, serial number, MAC address, and vendor name.
<Sysname> display device manuinfo
Slot 0:
DEVICE_NAME:SR6602-X2
DEVICE_SERIAL_NUMBER:NONE
MAC_ADDRESS:NONE
MANUFACTURING_DATE:2011-12-12
VENDOR_NAME:H3C
Slot 1:
DEVICE_NAME:RT-FIP-20
DEVICE_SERIAL_NUMBER:NONE
MAC_ADDRESS:NONE
MANUFACTURING_DATE:2011-12-12
VENDOR_NAME:H3C
Use the display device manuinfo slot slot-number command to display the electrical label information of
the module in the specified slot.
<Sysname> display device manuinfo slot 0
Slot 0:
DEVICE_NAME:SR6602-X2
DEVICE_SERIAL_NUMBER:NONE
MAC_ADDRESS:NONE
MANUFACTURING_DATE:2011-12-12
VENDOR_NAME:H3C