H3C Technologies H3C SR6600-X - Manual (Page 18)

8
Installing the router
NOTE:
The fan tray, power modules, FIPs, and interface modules are hot swappable.
Installation flow
Figure 3 SR6602-X installation flow
Check before installation
Follow these guidelines to prepare for installing an SR6602-X router:
• Make sure that you have read “ Preparing for installation ” carefully and the installation site meets all
the requirements.
• Prepare a 19-inch rack.
• Make sure that the rack is sturdy and securely grounded.
• Make sure that there is sufficient clearance around the rack for heat dissipation and installation.
• Make sure that there is no debris inside or around the rack.
• Move the router to a place near the rack.