H3C Technologies H3C SR6600-X - Manual (Page 63)

53
Table 12 Output description
Field Description
Slot 0 Router or interface module slot
DEVICE_NAME Router or module type
DEVICE_SERIAL_NUMBER Router or module serial number
MAC_ADDRESS
MAC address of the router or interface module:
• An MPU has a MAC address.
• A service module does not have a MAC address, and the field is
displayed as NONE.
MANUFACTURING_DATE Manufacturing data of the router or interface module
VENDOR_NAME Vendor name
The operation is not supported on
the specified board or subslot Displaying electronic label information by using the display device
manuinfo command is not supported.
Displaying the CPU usage of a module
Use the display cpu-usage command to display the CPU usage of the module in each slot.
<Sysname> display cpu-usage
Slot 0 CPU usage:
1% in last 5 seconds
1% in last 1 minute
1% in last 5 minutes
Table 13 Output description
Field Description
Slot 0 CPU usage CPU usage of the module in slot 0.
1% in last 5 seconds
Average CPU usage in the last five seconds (after the router boots, the router
calculates and records the average usage at the interval of five seconds).
1% in last 1 minute
Average CPU usage in the last minute (after the router boots, the router
calculates and records the average usage at the interval of one minute).
1% in last 5 minutes
Average CPU usage in the last five minutes (after the router boots, the router
calculates and records the average usage at the interval of five minutes).
Displaying the memory usage of a module
Use the display memory command to display the memory information of the MPU.
<Sysname> display memory
System Total Memory(bytes): 3639590560
Total Used Memory(bytes): 369429132
Used Rate: 10%