H3C Technologies H3C SecPath F1000-E User Manual
Page 190
Advertising
165
Figure 99 Configuring DHCP address pool 0
•
Enter pool0 for IP Pool Name.
•
Enter 10.1.1.0 for IP Address.
•
Enter 255.255.255.0 for Mask.
•
Enter aabbcc.com for Client Domain Name.
•
Enter 10.1.1.2 for DNS Server Address.
•
Click Apply.
# Configure DHCP address pool 1 (address range, gateway, lease duration, and WINS server address).
•
Click Add and perform the following configuration, as shown in
.
Figure 100 Configuring DHCP address pool 1
•
Enter pool1 for IP Pool Name.
•
Enter 10.1.1.0 for IP Address.
•
Enter 255.255.255.128 for Mask.
Advertising
This manual is related to the following products:
- H3C SecPath F5000-A5 Firewall H3C SecPath F1000-A-EI H3C SecPath F1000-E-SI H3C SecPath F1000-S-AI H3C SecPath F5000-S Firewall H3C SecPath F5000-C Firewall H3C SecPath F100-C-SI H3C SecPath F1000-C-SI H3C SecPath F100-A-SI H3C SecBlade FW Cards H3C SecBlade FW Enhanced Cards H3C SecPath U200-A U200-M U200-S H3C SecPath U200-CA U200-CM U200-CS H3C SecBlade LB Cards H3C SecPath L1000-A Load Balancer