H3C Technologies H3C SecPath F1000-E - Manual (Page 498)

473
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter BGP view. bgp as-number N/A
3. Enable BFD for the specified
BGP peer.
peer ip-address bfd
Not enabled for any BGP peer by
default
NOTE:
•
Before configuring BFD for BGP, you must enable BGP.
• For BFD configuration, see High Availability Configuration Guide.
Displaying and maintaining BGP
Displaying BGP
Task Command Remarks
Display peer group information
display bgp group [ group-name ] [ |
{ begin | exclude | include }
regular-expression ]
Available in any view
Display advertised BGP routing
information.
display bgp network [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display AS path information.
display bgp paths
[ as-regular-expression | | { begin |
exclude | include }
regular-expression ]
Available in any view
Display BGP peer/peer group
information.
display bgp peer [ ip-address
{ log-info | verbose } | group-name
log-info | verbose ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display the prefix information in the
ORF packet from the specified BGP
peer. display bgp peer ip-address received
ip-prefix [ | { begin | exclude |
include } regular-expression ]
Available in any view
Display BGP routing information.
display bgp routing-table
[ ip-address [ { mask | mask-length }
[ longer-prefixes ] ] ] [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display routing information matching
the AS path ACL.
display bgp routing-table as-path-acl
as-path-acl-number [ | { begin |
exclude | include }
regular-expression ]
Available in any view
Display BGP CIDR routing
information.
display bgp routing-table cidr [ |
{ begin | exclude | include }
regular-expression ]
Available in any view