H3C Technologies H3C Intelligent Management Center - Manual (Page 100)

92
Adding an edge switch
1. Click the Resource tab, and then select VAN Connection Manager > Edge Switch.
2. Click Add.
3. Click the Advanced tab, and enter 172.200.100.1 in the Device IP field.
4. Click Query. Devices with the IP address 172.200.100.1 are displayed in the Devices Found
area.
5. Select the target device, and click the icon to add the device to the Selected Devices area.
6. Click OK. The device list displays the edge switch. Leave the parameters as their default settings.
Figure 49 Adding an edge switch
Adding a network
1. Click the Resource tab, and then select VAN Connection Manager > Network.
2. Click Add.
3. Configure network parameters:
{
Name—Enter Enterprise A.
{
VLAN ID—Enter 1.
{
Max. Connections—Enter 200.
4. Click OK.