H3C Technologies H3C Intelligent Management Center - Manual (Page 78)

70
{
VM—Enter the name of the VM. This field supports fuzzy matching.
{
Access Switch—Enter the label of the edge switch. This field supports fuzzy matching.
{
Access Interface—Enter the interface name of the switch the VM connects to. This field supports
fuzzy matching.
{
Connection Name—Enter the name of the connection that is bound to the vNIC. This field
supports fuzzy matching.
{
VSI Type—Enter the VSI Type that is bound to the vNIC. This field supports fuzzy matching.
{
Operation Type—Select an operation type. Options are All, Online, and Offline.
{
Result—Select an operation result. Options are All, Success, Failure, Partial Success, Running,
and Waiting.
{
Execution Time From/To—Select or enter the execution start time and end time, in the format of
YYYY-MM-DD hh:mm:ss.
6. Click Query.
All connection deployment and undeployment processes that meet the query criteria appear in
the list.
To clear the query criteria and display all operations, click Reset.
To hide the advanced query area, click Close.
Viewing operation details
If a connection deployment or undeployment process fails, or only partially succeeds, you can view the
cause of failure on the Operation Details page.
To view operation details of a connection deployment or undeployment process:
1. Click the Resource tab.
2. From the navigation tree, select VAN Connection Manager > Life Cycle Report.
3. Click the Operation List tab.
All connection deployment and undeployment processes appear in the operation list.
4. Click the View icon for a process in the Operation field.
The Operation Details page displays the following areas and parameters:
Basic information area
{
Execution Time—Execution time of the process.
{
Operation Type—Type of the process: Online or Offline.
{
VM—Name of the VM.
{
vNIC—MAC address of the vNIC. If the VM has multiple vNICs, this field displays all MAC
addresses of these vNICs.
{
Access Switch—Device label of the edge switch on which the connection deployment or
undeployment process is performed.
{
Access Interface—Interface of the edge switch the VM connects to.
{
Result—Result of the process: Success or Failure.
{
Successful Operations—Number of successful operations.
{
Failed Operations—Number of failed operations.
{
Unexecuted Operations—Number of unexecuted operations.