H3C Technologies H3C Intelligent Management Center - Manual (Page 20)

12
percentage. The total number of ACLs that an edge switch can assign to VCM is determined by the ACL
Number Range configured for the switch.
Configuring the VAN View – TopN widget
You can configure the number of networks the VAN View – TopN widget displays and the refresh
interval of the widget.
To configure the VAN View – TopN widget:
1. Click the Home tab.
The default space Welcome appears.
2. Place the cursor over the icon on the top left corner of the space.
The icon changes into the Pin icon .
3. Click the Pin icon to pin the space tabs and function links on the home page.
4. Click the space where the VAN View – TopN widget is located.
5. Specify the number of networks the widget displays:
a. Place the cursor over the widget.
b. Click the Set icon on the top right corner and select Setting from the shortcut menu.
The Setting dialog box appears.
c. Select a value from the Top list.
The available options are 5, 10, 20, and 30. By default, the VAN View – TopN widget
displays the top 5 networks with the most connections.
d. Click OK to return to the space tab.
The following message appears on the top of the space:
Customized settings has been changed, do you want to save it now?
e. Click Save.
6. Set the refresh interval:
a. Click the Set icon on the top right corner of the widget and select Refresh Interval from
the shortcut menu.
The Refresh Interval Setting dialog box appears.
b. Select a refresh interval from the list.
The available options are No Refresh, 1, 5, 10, and 30. The default refresh interval is 10
minutes. The No Refresh option disables automatic refreshing for the widget.
c. Click OK to return to the space tab.
The following message appears on the top of the space:
Customized settings has been changed, do you want to save it now?
d. Click Save.
7. Click the Unpin icon .
The space tabs and function links are hidden from the home page.