H3C Technologies H3C Intelligent Management Center - Manual (Page 19)

10
4. Add monitored Lync servers:
a. In the Monitored Lync Servers area, click Add.
b. Select the Lync servers to monitor and click OK.
Select a maximum of five Lync servers. To monitor a Lync server in UCHM, first add a Lync
Server monitor to APM for the server running Lync Server.
5. Click OK.
Viewing the health status of the Lync network
The Lync Service Health Overview line chart displays the health status changes of the Lync network over
the specified time range:
• The horizontal axis represents different time points.
• The vertical axis represents the health status of the network.
• The health status values are color coded. For more information, see Table 6 .
Move the pointer over a spot on the curve to display the health status of the network at the specific time
point.
Figure 7 Lync Network Overview line chart
Table 6 Health status values and colors
Health status Font color
Excellent Green
Good Blue
Average Orange
Fair Dark red
Poor Red
No data Gray