H3C Technologies H3C Intelligent Management Center - Manual (Page 62)

53
8 Measuring Lync QoS
Use this module to delete and monitor Lync network performance.
Managing end-to-end tests
An end-to-end test detects the call quality on the path between a source endpoint and a destination
endpoint.
Viewing basic endpoint information
1. Click the Service tab.
2. From the navigation tree, select UC Health Manager > Lync QoS > End-to-End Test.
The End-to-End Test page appears.
3. Click Select next to the Source Endpoint field, select a source endpoint from the endpoint list that
appears, and click OK.
4. Select a destination endpoint by using the same method.
The Basic Information area appears.
Basic Information contents
• Endpoint Name—Host name of the endpoint.
• Endpoint IP—IP address of the endpoint.
• MAC Address—MAC address of the endpoint.
• Last Call Time—Time when the most recent call of the endpoint ended.
• Connection Type—Connection type of the endpoint. Options are Wired, Wireless, and
Ethernet.
• Operating System—Name of the operating system.
• CPU Name—CPU name of the endpoint.
• Number of CPU Cores—Number of CPU cores.
• CPU Processor Speed (MHz)—CPU processor speed in MHz.
• Virtual Environment—Virtual environment where the endpoint resides:
{
None
{
Hyper-V
{
VMware
{
Virtual PC
{
Xen PC