H3C Technologies H3C Intelligent Management Center - Manual (Page 72)

63
{
Minimum Negative Jitter from Destination to Source (ms)—Minimum negative jitter in
milliseconds from the source device to the destination device.
• Total
{
Sum of Positive Jitter Values from Source to Destination—Sum of positive jitters from the source
device to the destination device.
{
Sum of Absolute Value of Negative Jitters from Source to Destination—Sum of negative jitters
from the source device to the destination device
{
Sum of Positive Jitter Values from Destination to Source—Sum of positive jitters from the
destination device to the source device.
{
Sum of Absolute Value of Negative Jitters from Destination to Source—Sum of negative jitters
from the destination device to the source device.
• Sum of Squares
{
Sum of Squares of Positive Jitter Values from Source to Destination—Sum of squares of positive
jitter values from the source device to the destination device.
{
Sum of Squares of Negative Jitter Values from Source to Destination—Sum of squares of
negative jitter values from the source device to the destination device.
{
Sum of Squares of Positive Jitter Values from Destination to Source—Sum of positive jitter
values from the destination device to the source device.
{
Sum of Squares of Negative Jitter Values from Destination to Source—Sum of negative jitter
values from the destination device to the source device.
• Average
{
Positive Jitter Average from Source to Destination (ms)—Average positive jitter in milliseconds
from the source device to the destination device.
{
Absolute Value of Negative Jitter Average from Source to Destination (ms)—Average negative
jitter in milliseconds from the source device to the destination device.
{
Positive Jitter Average from Destination to Source (ms)—Average positive jitter in milliseconds
from the destination device to the source device.
{
Absolute Value of Negative Jitter Average from Destination to Source (ms)—Average negative
jitter in milliseconds from the destination device to the source device.
• Others
{
ICPIF Value—ICPIF value measured in the NQA voice operation.
{
MOS Value—MOS value measured in the NQA voice operation.
One-Way Delay Test Result
• Probe Packet Loss Ratio—Probe packet loss ratio of the NQA operation.
• Total Number of Received Response Packets—Number of response packets that the source device
receive from the destination device during the NQA operation.
• Number of Delays from Source to Destination—Number of delays from the source device to the
destination device.
• Maximum Delay from Source to Destination (ms)—Maximum delay in milliseconds from the source
device to the destination device.
• Minimum Delay from Source to Destination (ms)—Minimum delay in milliseconds from the source
device to the destination device.