H3C Technologies H3C Intelligent Management Center - Manual (Page 71)

62
Extended NQA Result
• Number of Timeouts—Number of probe packets that time out.
• Number of Forced Disconnections—Number of forced disconnections by the destination device
during the NQA operation.
• Failures to Set up Connections with Peer—Number of failures to set up connections with the
destination device during the NQA operation.
• Number of Failed Operations Due to Busy—Number of failures to initiate NQA operations
because the limit on NQA operations is reached.
• System Resource Allocation Failures—Number of times that a NQA operation failed to be initiated
for unavailability of system resources.
• Failures Caused by Packet Disorder—Number of packets that arrive out of sequence.
• Other errors—Number of other errors.
• Number of Packets Arriving Late—Number of packets that arrive after the timeout time expires.
NQA Voice Operation Result
• Quantity
{
Number of Received Response Packets—Number of response packets that the source device
receive from the destination device.
{
Number of Positive Jitter Values from Source to Destination—Number of positive jitters from the
source device to the destination device.
{
Number of Negative Jitter Values from Source to Destination—Number of negative jitters from
the source device to the destination device.
{
Number of Positive Jitter Values from Destination to Source—Number of positive jitters from the
destination device to the source device.
{
Number of Negative Jitter Values from Destination to Source—Number of negative jitters from
the destination device to the source device.
{
Number of Packets Lost for Unknown Reasons—Number of packets lost for unknown reasons.
• Maximum Value
{
Maximum Positive Jitter from Source to Destination (ms)—Maximum positive jitter in
milliseconds from the source device to the destination device.
{
Maximum Negative Jitter from Source to Destination (Absolute Value in ms)—Maximum
negative jitter in milliseconds from the source device to the destination device.
{
Maximum Positive Jitter from Destination to Source (ms)—Maximum positive jitter in
milliseconds from the destination device to the source device.
{
Maximum Negative Jitter from Destination to Source (ms)—Maximum negative jitter in
milliseconds from the source device to the destination device.
• Minimum Value
{
Minimum Positive Jitter from Source to Destination (ms)—Minimum positive jitter in milliseconds
from the source device to the destination device.
{
Minimum Negative Jitter from Source to Destination (Absolute Value in ms)—Minimum
negative jitter in milliseconds from the source device to the destination device.
{
Minimum Positive Jitter from Destination to Source (ms)—Minimum positive jitter in milliseconds
from the destination device to the source device.