Grass Valley 3DX-3901 - Manual (Page 14)

GUIDE TO INSTALLATION AND OPERATION
10 | 3DX-3901
Icon #4 – Health Monitoring
(green)
Hardware OK
(red)
Hardware Health Monitoring fault detected
If this icon appears red, return the card to Miranda and specify the error code.
Move the mouse over an icon and a status message appears below the icon providing additional information. If
there is an error, the error status message appears in the message area without mouse-over.
• If there are multiple errors, the error messages cycle so all can be seen
• The icon whose status or error message is shown is highlighted with a mauve background
Section 2. The left-hand side of the panel contains a series of buttons that control the contents of the main
window (section 3). Click on one to access the indicated controls. The selected button is highlighted (darker) and
the main panel heading matches the button name.
• Some of the buttons will be different depending on which model of the 3DX-3901 is in use
• This section can be hidden or revealed by clicking the arrow icon at the center of the left side border.
Section 3. This section contains the main operating controls and displays for managing the 3DX-3901’s feature
set. The contents are selected by clicking a button in section 2 on the left-hand side of the screen.
Each of the panels associated with the groups accessed from the buttons in section 2, and shown in section 3, is
described individually in the following sections.
3.4.2 The Video Input /Output panel
This panel provides resources for input and output
configuration.
These controls indicate if the 3D video will be carried on a
single link or a dual link transport. When a single link is
used, it is possible to select one of the Side by Side
modes or Over/Under depending on the 3D video
input/output. Otherwise, a Full value indicates this is a 2D
signal. In dual link mode, the card assumes each link
carries a full screen picture in the same video format.
See the diagram on the next page for an overview of the
formats that can appear at the inputs and outputs of the
3DX-3901.
Note that all VANC/HANC packets are passed through
untouched to the main left (1) and AUX outputs.
• Includes CC, TC, AFD, audio metadata, etc.
• All VANC/HANC data is frame accurate at all times.
• All VANC/HANC data is blanked when the input is
in error or during a manual freeze selection.
Figure 3.3 Video I/O panel