Grass Valley Indigo AV Mixer v.1.2.2 - Manual (Page 121)

INDIGO AV Mixer User Manual 121
Setup Main Menu
Downscaled
Inputs 9 and 10 can be set to show downscaled internal HR signals. The
routing is predefined: Input 9 shows the HR program signal (PGM), input
10 shows the HR preview signal (PVW).
DV IEEE 1394
Inputs 11 and 12 can be set to show DV codecs or SDI signals:
• DV
The signal of the DV input (Firewire) is shown.
• SDI
The PGM signal is shown.
Note The Firewire outputs always show the SD PGM signal.
VGA
Inputs 13 and 14 can be set to show VGA signals. If necessary, you can
modify the VGA signal:
• Use Extended Positioning to adjust (center) a VGA input that does not
match the supported VGA modes. If this button is active, you can
change Position X and Position Y even if Overscan X is 0 (see Align-
ment
section below).
• Auto Adjust automatically adjusts position and colors of the VGA signal.
• Activate Manual Gain to manually adjust the signal’s VGA Gain and
VGA Blacklevel .
SDI HD
Inputs 13 and 14 can be set to show SDI HD signals. If necessary, adjust the
aspect of the signal:
• Like SD-ME adopts the settings from the SD-M/E.
• 4:3 (independent from settings in SD-M/E)
• 16:9 (independent from settings in SD-M/E)
Internal SD
Inputs 13 to 15 can be set to show internal (upscaled) SD signals. The fol-
lowing internal sources can be selected:
• SD PGM
• SD PVW
• SD AUX1
• SD AUX2