Grass Valley Indigo AV Mixer v.1.2.2 - Manual (Page 132)

132 INDIGO AV Mixer User Manual
Section 7 — Menus
Source Select allows you to select if the signal comes from MAIN or SUB
source.
If you just want to have a delayed signal from the Main output, use Main .
Otherwise, you have to take care that in all used channels Main Out and
Sub-Out is selected.
Operation Mode
Select one of the following modes:
• 8 Stereo : You can use the audio signals of eight stereo sources, deriving
from RCA, TRS 1/4’’, XLR, AES/EBU signals or even de-embedded
audio from video streams.
• 7 Stereo, 2 Mic : You can use seven stereo audio signals (deriving from
RCA, TRS 1/4’’, XLR, AES/EBU signals or even de-embedded audio
from video streams) and two microphones that are connected to LINE/
MIC IN
inputs.
• 6 Stereo, 4 Mic : You can use six stereo audio signals (deriving from RCA,
TRS 1/4’’, XLR, AES/EBU signals or even de-embedded audio from
video streams) and up to four microphones that are connected to
LINE/MIC IN
inputs.
Note When assigning an XLR connector to a Mic Input, the corresponding Gain
parameter in Audio Mixer changes from Channel Gain to Mic Gain, indicating
the individually used pre-amplifier circuits.