Grass Valley Indigo AV Mixer v.1.2.2 - Manual (Page 18)

18 INDIGO AV Mixer User Manual
Section 3 — Connections
3.2 Electric Power Supply
3.2.1 AC Power Cable
Use the power cable to connect the power inlet of the INDIGO AV Mixer
to the wall outlet.
Note If required, ask your dealer for an appropriate power cable.
3.2.2 Ground Screw
Use the ground screw to connect the unit to the ground terminal.
Figure 3. The ground screw
3.3 Rackmount Connections
You can install your INDIGO AV Mixer in a rack using telescopic rails.
For this purpose, the device is equipped with four M5 cage nuts under-
neath.
Figure 4. Cage nuts for rackmounting
CAUTION To avoid damages of the unit, only use screws with a maximum length of
10 mm (0.39 inch).