Initial settings, 1 power-on, 2 video settings – Grass Valley Indigo AV Mixer v.1.2.2 User Manual
Page 33: Section 4 — initial settings, Power-on, Video settings
INDIGO AV Mixer
User Manual
33
Section
4
Initial Settings
If you switch on your INDIGO AV Mixer for the first time or use a new
setup (i.e. you connected different or additional devices) you have to
adjust the video and audio settings after first power-on.
4.1 Power-On
Use the power switch on the rear side to switch on your INDIGO AV
Mixer
.
Figure 21. The power switch
4.2 Video Settings
Configure the video settings as needed, according to the connected
devices:
1.
Select the
SETUP
main menu (see Setup Main Menu on page 116) to make
your settings.
2.
In the
VIDEO
submenu (see Video Submenu on page 120), press the
Input
button to list all video inputs and set the signal Type for each (used)
video input.
3.
Press the
Output
button and select the desired Graphic Standard
(resolution) and Type (PAL or NTSC).