Grass Valley iTX Output Server 2 v.2.6 - Manual (Page 11)

5
iTX Output Server 2
Channel Configuration Guide
Failovers are controlled in the same way as the master/slave model, however, iTX can only
promote main and backup channels to be leader channels; simulcast and simulcast backup
channels can only be followers.
Known limitations of Output Server 2
Output Server 2 has the following known limitations:
• Automatic Loudness Control (ALC) is currently not supported and set to Off by default
in the Output Server 2 Configuration panel.
• Raw audio mode is not supported for MPEG audio codecs.
• When using Dolby E (Auto) output, Dolby Metadata is not supported.
• Squeeze effects are not supported for CGs or logos in either Output Server 2 or Output
Server 1.
• Output Server 2 does not currently support regional sub-channels.