Grass Valley iTX Output Server 2 v.2.6 - Manual (Page 68)

62
Operation and Maintenance of an OS2 System
Server Controller Configuration for Output Server 2
4 Make sure Enabled is checked. This will run the instance of the service when Server
Controller is started.
5 In the Arguments field, the following arguments are available:
Argument Description Inclusion
-ui Enables the user interface, which is required
to access Output Server 2’s Configuration and
Engineering panels. Required
-n <Name> Specifies the name of the service. For
example, for a channel called "GV Movies 1"
you might enter:
-n GVMovies1 (no spaces)
A user friendly alias for channel names can be
created in iTX Desktop.
Required
-backup Used to indicate an instance is a backup
service. Optional
-t <Card type> Describes the type of video or audio card
fitted in the host machine. For example, for an
AJA Kona 3G video card:
-t AJAKona3G
Required
-id <Letter> Used to identify the inputs/outputs on the
SDI I/O card being used for the channel. For
example:
-id A
Required for
Corvid 44 or 88
cards
-p ITXPlayer 2 This argument is added to Server Controller
Config by default and identifies that Output
Server 2 is using the FPP plugin. Default
- p Simulator Enables Output Server 2’s simulator mode. Use for testing
only
6 Make sure Auto Restart is checked. This ensure Server Controller automatically
restarts the Output Server 2 service in the event of a failure.