Grass Valley iTX Output Server 2 v.2.6 - Manual (Page 57)

51
iTX Output Server 2
Channel Configuration Guide
• Dolby E (Auto) is not a recommended setting. Use either DolbyE 5.1 or DolbyE
5.1+2 .
• Raw for MPEG audio codecs is not supported.
8 To map the track by a language tag:
a Click on the Language field.
The Language Selection pop-up layout appears.
b Select the language code(s) for the default output track.
c Click Add.
d Click OK.
9 To map the track by a group, click on the Group drop-down list and select a value.
10 Click the Default column and select a group value to assign to the track. This is the
group that will be used in the event neither the language nor the group are available.
11 To map another track, click Add then repeat step 7 to step 10 .
12 Click Save then Close.
About Simulcast Event Substitution Rules
If you require alternative logos, CGs or stills for your simulcast channel compared to your
main channel, this can be configured from the Simulcast Channel Config panel on the
Channel Config pop-up layout in iTX Desktop.
This panel only appears for simulcast channels and allows you to define a rule to determine
when logo, CG and stills events scheduled on the main channel are substituted on the
simulcast channel. Only one rule can be defined and it is applied to all matching assets.
Substitutions are defined by the suffix of the HD asset name, the suffix of the SD asset name
or both. For example, if
_HD is entered into the Original Suffix field and _SD is entered into