Grass Valley JEP Series v.1.3.0 - Manual (Page 27)

JEP Series — Installation Manual 27
Hardware Installation - Jupiter System
Serial System
This wiring arrangement assumes that the JEP-100(s) will be operated in
Serial mode, with the LAN typically connected to one panel at a time only
during software upgrades. See
Figure 3 .
Note The LAN must be capable of 100 Mb operation. Each Ethernet segment (hub
to panel) has a 100 meter limit.
Figure 3. Serial system connections.
CM
CM -4000 System Controller
Serial
Ports
100baseT Jupi-
ter LAN
16 JEP
100s per serial bus maximum
IP switch
to Jupiter
File Server
Serial data cable
LAN (Cat 5 Ethernet) cable.
Max. recommended length per
segment = 100 meters (329 ft)
Temporary LAN connection for
software upgrade.
Serial bus
Serial bus
8536_09
-4400 or