Grass Valley JEP Series v.1.3.0 User Manual
Page 40
40
JEP Series — Installation Manual
Section 1 — JEP-100 Control Panel
Follow these steps to load the latest software onto the panels:
1.
Start the Update Manager application. (Start>All Programs >Grass
Valley>Jep100 >UpdateManager) Any JEP-100 panels on the network
should be displayed.
The program will find the JEP-100 panels
Figure 17. The Update Manager Application
2.
Select the panel and then click the
Change IP
button. The Change IP
Addresses dialog will then appear.
Note
The IP Addresses shown in
are used for example only. Enter your
Network settings.
Figure 18. The Change IP Addresses Dialog
3.
Select the
IP Address
check box and then enter a free IP address on your
network.
4.
Select and enter the information about your network in the field.
5.
Click the
OK
button.
Double-click the
Displayed Panel
Enter 6 digit Serial # or the last
6 digits of the MAC address