Grass Valley JEP Series v.1.3.0 - Manual (Page 50)

50 JEP Series — Installation Manual
Section 1 — JEP-100 Control Panel
Configuration - Jupiter System
The following overview of JEP-100 installation and configuration assumes
that the reader is familiar with the Jupiter Facility Control System. If not,
please refer to the latest Jupiter CM-4000 or CM-4400 Installation and Oper-
ating manual.
LAN Only System
In a system that uses LAN only, the JEP is operated in Ethernet mode,
where the LAN connection is used both for operation and for software
upgrade purposes. (
Figure 27 )
Figure 27. LAN only system naming and addressing
100baseT Jupi
ter LAN
IP switch
Panel ID
02"
Panel ID
01"
64 JEP-100s per
CM maximum
Panel ID
64"
Jupiter
File Server
CM-4000 System Controller
CM1"
JEP1"
JEP2"
JEP64"
Configuration - Jupiter