Vde modifications to serial data cables, Joystick override – Grass Valley JEP Series v.1.3.0 User Manual
Page 30

30
JEP Series — Installation Manual
Section 1 — JEP-100 Control Panel
VDE Modifications to Serial Data Cables
User-supplied serial data cables for VDE installations require a ferrite core
over each end of the cable, adjacent to the connector.
Figure 6. Serial data cable VDE modifications.
Joystick Override
This function applies only to the current JEP-100 model, which has a 15-pin
D female connector on the rear panel to provide a total of 14 joystick control
lines plus ground.
Type 43 material
0.250 inch (6.35 mm) inside diameter
0.95 inch (24.13 mm) length (or longer)
Type 43 material sources
Fair Rite, part no. 2643480002
Fair Rite Products Corp., P .O. Box J, Commercial
Row, Wallkill, NY 12589, USA; Tel. (914) 895 2055.
Chomerics, part no. 83 10 A636 1000
Chomerics Inc., 77 Dragon Ct., Woburn, MA 01888
USA; Tel. (617) 935 4850.
8536_12