Grass Valley JEP Series v.1.3.0 - Manual (Page 72)

72 JEP Series — Installation Manual
Section 2 — JEP-100 CP Operation
Executing a Sequence
After a sequence is created and downloaded, it can be executed as follows:
1. SALVO button - On.
The name of the first sequence (e.g., "SETUP1") will be shown in the
Status window.
2. Use UP/DOWN to scroll to the preferred sequence.
3. Press the TAKE button to execute the sequence.
Assigning a Sequence to a Button
The 96 keys on the left side of the JEP can be assigned to individual
sequences. Pressing the assigned button will then execute the sequence.
1. ASSIGN button - On.
2. SALVO button - On.
The name of the first sequence (e.g., "SETUP1") will be shown in the
Status window.
3. Use UP/DOWN to scroll to the preferred sequence.
4. Press one of the preferred 96 keys on the left side of the panel.