Grass Valley JEP Series v.1.3.0 - Manual (Page 39)

JEP Series — Installation Manual 39
Updating to the Latest Software Version
Figure 15. The Network Download Utility
2. Highlight the line with the 1.2.0 panel in the middle message area.
3. Click Download ( Figure 15 ) the download process will then start. Watch
the messages in the window to know when the download is complete.
The JEP-100 panel will display “Download is Pending.”
Figure 16. The JEP-100 panel will display “Download is Pending”
Using the Update Manager
In this section you will update the panel, with the previously updated firm-
ware, using the Update Manager application. Control Panels should only
be upgraded one at a time using this tool.
Note After using the Download manager, the control panel's IP address was
altered; you will be required to reset the control panel's IP address before
proceeding.
2. Click Download
1. Click this area
071837202_JEP100_display
Destination
Status
Preset
Level
JEP-100
Download
IS
Pending