Grass Valley K2 Summit 3G v.8.0 - Manual (Page 104)

Carrier module removal
1. When removing the carrier module, access it from the rear panel. Remove as illustrated.
Slide out 3
Remove
screw 1
Remove
screw 2
2. When replacing the carrier module, the screw attachment sequence is critical, as illustrated.
Slide in 1
Fasten
screw 3
Fasten
screw
Note: You must install the
screw on this side first. 2
104 K2 Summit 3G Production Client Service Manual 02 February 2012
Removing and replacing FRUs