Grass Valley Karrera Video Production Center Installation v.4.1 - Manual (Page 152)

152 KARRERA — Installation & Service Manual
Section 5 — Basic Configuration
Select the desired Bank(s) on the left, a Source Select button on the scrolling
list in the center of the menu, then assign a source to that button from the
scrolling list on the right.
• The Button Count settings identify the size of the bank (15, 25, or 35 Source
Select Buttons.
• The Source Number data pad and knob can be used to quickly scroll
through and select sources.
• The Source Filter data pad opens a keyboard allowing entry of an alpha-
numeric source name filter. Only source names that begin with the
entered text will be displayed in the scrolling to the immediate left.
• The Show All button clears the source filter.
Suite Prefs
Source Patch Menu
The Source Patch menu controls what source names are displayed on the
Control Panel and Menus, and permits patching of engineering sources to
logical sources.
Default Keyframe
Default Keyframe settings are applied when an empty register is recalled
and when the
CWB (Clear Working Buffer ) button is pressed in the Master
EMEM Module ( EMEM Edit , CWB button) of the main panel. The Default Key-
frame menu is used to learn the current Karrera panel state to the system’s
Default Keyframe. Individual settings for each MEs are stored in the
Default Keyframe, so different states can be saved for different MEs, if
desired.