Grass Valley Karrera Video Production Center Installation v.4.1 - Manual (Page 267)

KARRERA — Installation & Service Manual 267
SNMP Monitoring
Control Panel
Menu Panel Processor
The Menu Panel Processor (the PC running the Menu application) can be
monitored separately, using the standard built-in Windows SNMP capabil-
ities and a third-party NMS. No unique Grass Valley MIB entries or traps
are available.
Note NetCentral supports the monitoring of Grass Valley devices only, and cannot
directly monitor standard PCs.
SNMP Installation
Grass Valley switchers system devices running version 4.0 and higher soft-
ware have SNMP Agent software already installed. No user installation is
required.
Separate NMS software (NetCentral or a different third party package) will
need to be installed onto a PC that resides on the switcher network. Refer
to the documentation provided with the NMS for installation instructions.
SNMP Licensing
Grass Valley switcher system SNMP licensing is based on the Video Pro-
cessor Frame, and is tied to that Frame’s unique System ID number. All
Control Panels associated with a Frame will use that same SNMP license.
The Frame’s System ID is shown on the Menu application’s Install Options
screen This screen also reports the current licensing status of that Frame
(
Figure 218 ).
Table 16. Supported Kayenne/Karrera Control Panel SNMP Monitoring
Fan (1- 3) Kayenne: PCU has three fans.
Karrera: 2ME Control Panel has one fan, 3 ME has two fans.
Power Supply (2) Will report power failure if a power supply is not present or not plugged in.
Temperature (2 or 3) Kayenne: One ambient temperature, one on CPU.
Karrera: One ambient temperature, one on the Panel Processor FPGA, one on CPU.
Modules (Control Panel boards) Status change traps are sent when a module is connected or disconnected.