Grass Valley Karrera Video Production Center Installation v.4.1 - Manual (Page 262)

262 KARRERA — Installation & Service Manual
Section 7 — Maintenance
3. Select System , click on the Create CF button, and choose the CF card type,
either Frame or Panel ( Figure 213 ).
Figure 213. GV Switcher Installer, Create CF Card Screen
4. A DOS window will start, and then a separate window opens asking for
the CF card location (D, E, F etc.) with the memory size of the device.
Choose the correct device (CF card) to format. Even if only one CF card
is present, you may still need to choose it on the list (
Figure 214 ).
Figure 214. GV Switcher Installer, Select CF Card Screen