Grass Valley 1200 Operation Manual - Manual (Page 110)

3-64
Section 3 — Controls & Menus
Crosspoint Map Menu
From the Configuration top menu, press [XPT MAP>] to display the
Crosspoint Map menu shown in Figure 3-30. This menu permits
mapping of input BNC connectors to crosspoint pushbutton
columns.
Crosspoint Map Menu Functions:
(XPT) —Selects a crosspoint number in the display table.
(PHYSICAL INPUT) —Selects and assigns a physical BNC input to the
crosspoint currently highlighted in the display table.
[XPT MAP SELECT] —Selects between two crosspoint maps, the
NORMAL map and the ALTERNATE map. This feature is useful if you
have two different uses for the switcher and you want to set up
two different maps.