Grass Valley 1200 Operation Manual - Manual (Page 75)

3-29
Pattern
Pattern Selection Buttons
The ten pattern buttons select the ten primary wipe patterns, and
the [MENU] button opens the Wipe menu, providing access to more
patterns.
■ To select one of the ten primary patterns, momentarily press
a [PATTERN] button. The button will light. Only one pattern
button can be selected at a time.
■ To select a menu pattern, press the [MENU] button to open the
Wipe menu and use the menu controls to select a pattern from
the menu.
User Wipe Buttons
You can store and recall pattern setups, including modifiers,
using the four User buttons and the [LEARN USER WIPE] button.
■ To store a pattern, just press [LEARN USER WIPE] followed by
one of the User buttons, such as [USER 1].
■ To recall a pattern, press the User button in which it is stored.
■ If you need to undo a user wipe learn or recall, press [UNDO]
after the learn or recall before you press any other button. The
conditions prior to the learn or recall will be restored.