Grass Valley 1200 Operation Manual - Manual (Page 38)

2-20
Section 2— Startup
Crosspoint Map Menu
The Crosspoint Map menu (Figure 2-11) is displayed by pressing
the
[Config] button and then the [XPT MAP>] button.
1. Set the [XPT MAP SELECT] soft button to the NORMAL or
ALTERNATE crosspoint map. Using this function, you can
define two completely different crosspoint maps and switch
between them as desired. If you plan to use only one map,
select
NORMAL .
2. Use the (XPT) soft knob to select the crosspoint to be
highlighted.
3. Use the (PHYSICAL INPUT) soft knob to assign a Physical
Input to the highlighted crosspoint. The Signal Name column
will display the descriptive name of the selected Physical
Input. (Signal Name is created in the Define Inputs menu.)