Grass Valley 1200 Operation Manual - Manual (Page 112)

3-66
Section 3 — Controls & Menus
Outputs Menu
From the Configuration top menu, press [OUTPUTS>] to display the
Outputs menu shown in Figure 3-31. This menu allows you to set
parameters for each switcher output signal.
Outputs Menu Functions:
(OUTPUT) —Scrolls through the outputs in the display table,
highlighting the current selection.
[BITS RES] —Sets the digital resolution of the highlighted output to
8 or 10 bits to match the resolution of the signal destination.
[SHAPING] —Sets shaping of the highlighted output ON or OFF.
Turning shaping ON provides a video output that has been shaped
(multiplied) by the key and matted over black. Turning shaping
OFF
provides a regular, unshaped video output.
[SIGNAL SOURCE] —Selects the highlighted output to consist of
either PROGRAM (video with key) or CLEAN (video without key).