Grass Valley 1200 Operation Manual - Manual (Page 160)

3-114
Section 3 — Controls & Menus
Wipe Modulation Menu
Press the [MOD>] button in the Wipe menu to display the
Modulation menu shown in Figure 3-58.
Wipe Modulation Menu Functions:
[HORIZ MOD] —Selects the horizontal modulation mode applied to
the pattern. If TRIANGLE is selected, the horizontal edges of the
pattern are rippled by a triangle wave. If SINE is selected, the
horizontal edges are rippled by a sine wave. OFF turns off
horizontal modulation.
[VERT MOD] —Selects the vertical modulation mode applied to the
pattern. If TRIANGLE is selected, the vertical edges of the pattern
are rippled by a triangle wave. If SINE is selected, the vertical
edges are rippled by a sine wave. OFF turns off vertical
modulation.
(AMPLITUDE) —Sets the amplitude of the modulation.
(FREQUENCY) —Sets the frequency of the modulation.
(PHASE) —Sets the phase of the modulation.