Grass Valley 1200 Operation Manual User Manual
Page 174
4-12
Section 4— Basic Operations
4.
Now do the transition:
■
For an effects key cut, press Transition [Cut].
■
For an effects key mix, select [Mix] and move the lever
arm from limit to limit or press [Auto Trans].
■
For a wipe, select Transition [Wipe], and select and adjust
the pattern as described earlier for background wipes.
Then move the lever arm or press [Auto Trans].
■
For a DSK cut, press [DSK Cut].
■
For a DSK mix, press [DSK Mix].
■
When a key is on-air, the Key On indicator lights below
the appropriate keyer delegation button on the transition
sub-panel (and on the Keyer sub-panel if the on-air keyer
is delegated).
5.
Once the key is on air, you can change backgrounds behind it:
Select
[Bkgd]
only and do a transition.
6.
To remove the key(s), select
[Key 1]
and/or
[Key 2]
and do
another transition. You can also cut the currently delegated
key layer on or off using the Keyer
[Cut]
button.