Grass Valley 1200 Operation Manual - Manual (Page 60)

3-14
Section 3 — Controls & Menus
Trans Buttons
Using the three Trans buttons, you can assign automatic transition
rates for M/E, DSK, and Black transitions:
■ Press one of the trans buttons: [M/E TRANS], [DSK TRANS], or
[BLACK TRANS]
. The E-MEM display will prompt you with
“Trans =?”.
■ Use the keypad to enter a transition rate in television frames.
■ Press [ENTER] to confirm the new rate. The new transition rate
should appear in the appropriate transition rate display.
Clear
■ When used in conjunction with other buttons the [CLEAR]
button resets the selected functions to their default values. To
clear a function to its default values, hold down the button for
that function and press [CLEAR]. If you double press the
[CLEAR]
button, the menu display brings up the Misc. menu.