Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 - Manual (Page 109)

Chapter 8 System Administration
108 Digital News Production
Upgrading to Dual Node Mode
(You must be running in single node mode to use this window.) To create a
new, second server node when upgrading from a single node to dual nodes,
choose
System | System Administration | Node Mode Upgrade .
NOTE: For information on using IP addresses in a network, refer to
“Basics of IP Addresses” on page 42.
When setting new IP addresses on this window, the following requirements
must be met:
For Port 0, these addresses must be on the same subnet:
• Node 1, Public IP address
• Node 1, Private IP address
• Node 2, Public IP address
• Node 2, Private IP address