Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 - Manual (Page 34)

Cabling
Digital News Production 33
The I-Squared C serial cable (shown red in the diagram on page 32) can have
3, 5, or 10 connections. This illustration shows a five-connector cable.
Cable the first connection to first enclosure. Cable the last connector to the last
enclosure. If you have more connectors than ports, leave the middle connectors
uncabled. It is important that the first and last connector are cabled to the first
and last enclosures.
To cable a PFR-600 array to multiple PFR-600 JBOD arrays, use the cables
illustrated below.
(For more information on cabling PFR-600 arrays, refer to the PFR-600 array
Instruction Manual, Part No. 071826600.)
Leave extra
connectors unattached,
if necessary
Connect the last
connector on the
I 2 C serial cable
to the last enclosure
Serial port
connector
5 connections, one serial port connector