Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 - Manual (Page 112)

Using the Command Line Interpreter
Digital News Production 111
Using the Command Line Interpreter
To enter commands in a command line interpreter (CLI), choose System |
System Administration | CLI .
The Run Command Line (CML) window is a function used under the direction
of Thomson Grass Valley Support staff. If there is a need to run a CLI, call
Ciprico to obtain instructions.
1. Enter a password.
2. Click Submit .
A second CML Command window appears. Use the drop-down list to select
the
command to run.
1. Parameters can be passed to the command.
2. Click on the hypertext link to run the command. The results of running the
command, if any, are shown in the Result area.