Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 - Manual (Page 53)

Chapter 3 Software Setup
52 Digital News Production
Setting the Date and Time
The Date/Time window that appears as part of Setup does not support Network
Time Protocol (NTP). You can only configure NTP after Setup is complete and
you have rebooted. If you want to configure NTP, see “Setting the Date and
Time (Option To Use NTP)” on page 112. During Setup, use the window
shown to review the date and time.
1. Select the correct time zone for the site.
NOTE: To automatically update scheduled time changes such as
Daylight Savings Time, use a city time zone rather than a regional
time zone.
2. Specify the current date , using the drop-down arrows.
3. Specify the current time , using the drop-down arrows.
4. Click Next to proceed or Back to return to the previous window.