Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 User Manual

Page 121

Advertising
background image

Chapter 9

Network Administration

120

Digital News Production

3. You cannot change the

netmask

. The netmask is used to filter messages into

a particular network segment. It is stored in the NewsShare NAS server node
and is matched to each incoming IP address to determine whether to accept
or reject the message packet. The preset netmask is 255.255.0.0.

4. Enter the

host name

for each NewsShare NAS server node in the system.

Use a maximum of 64 characters. The first character must be alpha. The
others must be alphanumeric or an underscore (_). Blanks are not accepted.

5. (Optional) Enter new

IP address

. This address cannot be in use by any other

device in the network.

6. Click

Save

to save the new information.

Advertising