Updating firmware locally – Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 User Manual
Page 146
Advertising

Updating Firmware Locally
Digital News Production
145
Updating Firmware Locally
The Update RAID Controller Firmware window lets you update RAID
controller firmware from a local machine.
1. Specify the full pathname of the firmware. Type in the pathname of the
RAID controller
firmware version
or click
Browse
to locate the RAID
controller firmware version file.
>>> Stop all reading and writing to the array before updating the controller
firmware.
2. To start the update, click
Save
.
3. After rebooting the appliance, perform the update procedure again so that the
firmware resides in both banks of the controller.
Advertising