Grass Valley Network Attached Storage System Serial ATA Network User Guide v.1.0.04 - Manual (Page 160)

Disconnect from the System
Digital News Production 159
Disconnect from the System
• If you have a desktop system with a cover, reverse the process described in
“Desktop System” on page 26.
• If you have a racked system, remove the server as shown in “Optional
Racked System” on page 29.
Attach the Replacement Server Node
• If you have a desktop system with a cover, replace the cover by following
the procedure described in “Desktop System” on page 26.
• If you have a racked system, insert the server as shown in “Optional Racked
System” on page 29.
1. Cable the Server Node. Follow the cabling diagram shown in “Cabling” on
page 30.
2. Power on the node by pressing the On/Off switch.
3. Re-install the front cover.
4. Choose System | System Information | Status to verify the status of the
node.