HEIDENHAIN TNC 410 - Manual (Page 294)

281 HEIDENHAIN TNC 410
15.1 Gener
al User P
a
ra
met
ers
Radius measurement with the TT 120: Distance from lower edge of tool to upper edge of stylus
MP6530
0.001 to 30 000.000 [mm]
Set-up clearance in the tool axis above the stylus of the TT 120 for pre-positioning
MP6540.0
0.001 to 30 000.000 [mm]
Clearance zone in the machining plane around the stylus of the TT 120 for pre-positioning
MP6540.1
0.001 to 30 000.000 [mm]
Rapid traverse for TT 120 in the probe cycle
MP6550
10 to 20 000 [mm/min]
M function for spindle orientation when measuring individual teeth
MP6560
-1 to 88
Measuring rotating tools: Permissible rotational speed at the circumference of the milling tool
Required for calculating rpm and probe feed rate
MP6570
40.000to 120.000 [m/min]
REF coordinates of the TT-120 probe contact center point
MP6580.0
X axis: -30 000.000 to 30 000.000
MP6580.1
Y axis: -30 000.000 to 30 000.000
MP6580.2
Z axis: -30 000.000 to 30 000.000