HEIDENHAIN TNC 620 (340 56x-01) - Manual (Page 524)

524
M128
M129 Retain position of tool tip when positioning tilting axes (TCPM)
Cancel M128 „
„
Page 215
M130 Within the positioning block: Points are referenced to the untilted coordinate
system „ Page 201
M140 Retraction from the contour in the tool-axis direction „ Page 209
M141 Suppress touch probe monitoring „ Page 210
M143 Delete basic rotation „ Page 210
M148
M149 Retract the tool automatically from the contour at NC stop
Cancel M148 „
„
Page 211
M Effect Effective at block... Start End Page
The machine tool builder may add some M functions that
are not described in this User’s Manual. Also, the machine
tool builder can change the meaning and effect of the
M functions described here. Refer to your machine
manual.