SMA SSM8-21-BS - Manual (Page 19)

SMA Solar Technology AG 5 Mounting
Installation Manual SSMxx-21-IA-BS-JP-en-20 19
Additionally required mounting material (not included in the scope of delivery):
• 4 screws M8 Take wall properties into account when choosing the screws.
• 4 washers
• If necessary, 4 screw anchors. Choose the screw anchors according to the properties of the wall surface.
Figure 7: Dimensions of the Sunny String-Monitor
Procedure:
1. Mark the position of the drill holes on the wall or stand.
2. Drill holes at the marked positions.
3. If necessary, insert the screw anchors.
4. Attach the two mounting rails to the Sunny String-Monitor with the
screws supplied (torque: 15 Nm).
/05*$&
Damage to cable glands and plug connections due to improper transport and installation
The cable glands and plug connections protrude from the enclosure.
• Ensure that the cable glands and plug connections are not damaged during mounting and transport.