Yaskawa 1000 Series Drive Option - CANopen Installation - Manual (Page 34)

9 Fault Diagnosis and Possible Solutions
34 YASKAWA ELECTRIC TOBP C730600 45B 1000-Series Option SI-S3 Installation Manual
Digital Operator Display Fault Name
oFb00
Option Card Fault at Connector CN5-B
Non-compatible option card is connected.
Cause Possible Solution
The CANopen option card has been
plugged into option port CN5-B.
⇒ Always use option port CN5-A for communication option cards.
Digital Operator Display Fault Name
oFb02
Option Card Fault at Connector CN5-B
Two of the same option cards are connected at the same time.
Cause Possible Solution
Two or more input option cards
(analog, digital or communication)
have been connected to the drive at the
same time.
⇒ Use either an analog input option AI-A3 or a digital input option DI-A3
or a communication option card. Never use two of these cards at the same
time.
Digital Operator Display Fault Name
oFC00
Option Card Fault at Connector CN5-C
Non-compatible option card is connected.
Cause Possible Solution
The CANopen option card has been
plugged into option port CN5-C.
⇒ Always use option port CN5-A for communication option cards.
Digital Operator Display Fault Name
oFC02
Option Card Fault at Connector CN5-C
Two of the same option cards are connected at the same time.
Cause Possible Solution
Two or more input option cards
(analog, digital or communication)
have been connected to the drive at the
same time.
⇒ Use either an analog input option AI-A3 or a digital input option DI-A3
or a communication option card. Never use two of these cards at the same
time.